What is PD value?

PD is Pupillary Distance, which is the distance between your two pupils in millimeters. PD is very important for accurately fitting your lenses to achieve visual clarity. Average PD is about 62mm and most people fall within the 54mm to 74mm range.

How to measure your PD value?

We high recommend checking your PD value with your eyedoctor, especially for bifocal or progressive lenses. Also, you can measure the PD value by yourself according to the following steps.

1.Place a millimeter ruler on the bridge of your nose.
2.Line up the starting point (0 mm) with your right(or left) pupil (the black dots in the middle of your eyes). If you are looking straight ahead, this measurement is only accurate.
3.Looking straight into the mirror, hold the ruler (keeping it steady and parallel to the floor) and mark the location on the ruler of the other eye’s pupil. Or if someone else is reading the ruler they must be at the same height as you and be sure to hold the ruler steady and parallel to the floor.
4.Then measure the distance in millimeters between the two marks. This is your PD value.
5.Repeat the above steps two or three times for accuracy.
6.Record your measurements.

Notes:

1. The average PD value is 62mm for women and 64mm for men. It can, however, range between 54mm and 74mm.

2. For those requiring progressive lenses, we highly recommend you get this information from your eyedoctor to ensure the accuracy of your glasses.

3. Your PD value may be written in three ways:
▪ PD (OU), written as "61", means the Binocular PD which is for both eyes.
▪ Sometimes your prescription will provide two PD values and both are quite below the PD range provided on the website, your prescription is likely for a single eye. For example, 30/31, which means OD/OS(Right Eye/Left Eye).
▪ Sometimes PD is written as "63/60" or they are labeled "Far " and "Near ". For distance glasses, the PD value is "63" in this example. For reading glasses, the PD value is "60" in the example. Always enter your "Far PD" for distance vision eyeglasses and enter your "Near PD" for your reading glasses only. For most people, the difference between Far PD and Near PD is about 2-3mm.

4. Please do not try to measure the PD value from your current glasses since the PD value can’t be measured from them. Please do not guess or assume your PD.